Disassembly and installation steps of Auto Parts exhaust interlock pipe

Many people judge the performance of a car and always regard the number of exhaust pipes at the rear of the car as the standard. They think that the more exhaust pipes, the thicker the exhaust pipes, and the louder the Auto Parts exhaust interlock pipe, the greater the power. Some car manufacturers even install some fake Auto Parts exhaust interlock pipes. So what exactly is Auto Parts exhaust interlock pipe? In the beginning, we need to explain why Auto Parts exhaust interlock pipe is used. The engine works by inhaling air, and the exhaust gas after the engine is working is exhausted. The pipe used to discharge the exhaust gas is the Auto Parts exhaust interlock pipe. The exhaust system is mainly divided into three parts: the head section, the middle section, and the tail section. Now, let me introduce to you the disassembly and installation steps of the Auto Parts exhaust interlock pipe. Here are some answers.

Here is the content list:

l Disassembly and assembly steps of Auto Parts exhaust interlock pipe.

l Installation steps of Auto Parts exhaust interlock pipe.

Disassembly and assembly steps of Auto Parts exhaust interlock pipe.

First, disconnect and disassemble the rear-heated oxygen sensor. Second, remove the front Auto Parts exhaust interlock pipe nut and lining heat from the catalytic converter. Third, install the Auto Parts exhaust interlock pipe bracket before disassembling. Fourth, remove the former Auto Parts exhaust interlock pipe from the mounting frame of the Auto Parts exhaust interlock pipe from the front. Fifth, remove the former Auto Parts exhaust interlock pipe from the rubber ring at the connection of the third muffler from the former Auto Parts exhaust interlock pipe. Sixth, disassemble the front Auto Parts exhaust interlock pipe to the third muffler flange fixing nut. Seventh, disassemble the Auto Parts exhaust interlock pipe and gasket before disassembly. Eighth, clean the sealing surfaces of Auto Parts exhaust interlock pipe and Auto Parts exhaust interlock pipe before cleaning. Ninth, check whether the front Auto Parts exhaust interlock pipe and the catalytic converter or the third muffler have holes, damage, cracks, or other damages that cause exhaust gas to leak into the passenger compartment or trunk.

Installation steps of Auto Parts exhaust interlock pipe.

First, install the lining heat between the muffler and the front Auto Parts exhaust interlock pipe. Second, install the front muffler tube. Third, install the front muffler pipe to the third muffler fixing nut. Fasten the front muffler pipe to the third muffler nut to 30Nm. Fourth, install the front Auto Parts exhaust interlock pipe to the rubber ring. Fifth, install the front Auto Parts exhaust interlock pipe into the front mounting frame of the Auto Parts exhaust interlock pipe. Sixth, install the front lower Auto Parts exhaust interlock pipe mounting bracket to the front Auto Parts exhaust interlock pipe. Seventh, install the front lower Auto Parts exhaust interlock pipe mounting bracket to the front upper Auto Parts exhaust interlock pipe mounting bracket welding bolts with nuts. Tighten the Auto Parts exhaust interlock pipe mounting bracket nut to 30Nm before tightening. Eighth, the lining heat between the Auto Parts exhaust interlock pipe and the catalytic converter before installation. Ninth, install the front exhaust pipe to the catalytic converter with a nut. For general models, tighten the Auto Parts exhaust interlock pipe to the catalytic converter nut to 40Nm before tightening.

Our official website is https://www.wxhy-exhaust.com/. If you are engaged in work related to Auto Parts exhaust interlock pipe and Metal Bellows, you can communicate with us on the website.