Views: 0 Author: Site Editor Publish Time: 2021-11-08 Origin: Site
The failure of an exhaust flexible pipe may also cause white smoke and Nanyan. These problems have an important impact on the use of the product. Judging the possible problems based on the smoke discharged from the exhaust flexible pipe is an important part of maintaining the exhaust flexible pipe.
Here is the content list:
l Maintenance method
l Maintenance skills
1. When the exhaust flexible pipe is difficult to start in winter, close the choke door and start the engine. After the car is hot, please open the exhaust flexible pipe choke door in time. It is forbidden to drive at high speed for a long time with the choke door closed
2. It is forbidden to install windshields or other decorative items in front of the engine and muffler on riding bicycles, which will affect the heat dissipation of the exhaust flexible pipe and muffler
3. Do not drive for a long time with heavy load and low gear, which will cause damage to the exhaust flexible pipe and the muffler
4. Do not hit the throttle at high speed on the spot for a long time
5. When the surface of the exhaust flexible pipe muffler has oil stains, the color of the surface will change and become yellow after the car is heated. In addition, when there is a large amount of dirt and other dirt on the surface of the exhaust flexible pipe muffler, please clean it in time to avoid affecting the heat dissipation of the exhaust flexible pipe
6. When installing the muffler on the exhaust flexible pipe, pay attention to the exhaust flexible pipe muffler pad is installed in place and fastened to prevent air leakage, affecting the exhaust flexible pipe muffler effect and causing yellowing at the muffler interface
7. The engine valve clearance, exhaust flexible pipe carburetor, air filter, etc. should be adjusted and cleaned in time and correctly according to the instructions of the vehicle. If the exhaust flexible pipe valve clearance is too small or the mixture is too thick or too thin, it will affect Burning, affecting the exhaust flexible pipe muffler and causing discoloration.
When driving or washing the car on a rainy day, you must pay attention to prevent the exhaust flexible pipe muffler from entering the water, otherwise, it will easily cause the exhaust flexible pipe to rust, which will affect the use of the exhaust flexible pipe; if you do not let the muffler enter the water, start it immediately When the engine is hot, let the accumulated water in the exhaust flexible pipe muffler be discharged as much as possible. This is particularly important for the maintenance of the exhaust flexible pipe.
The anti-rust of automobile exhaust flexible pipe is not only waterproof, but the best way is to wipe the exhaust flexible pipe with anti-rust oil so that it can be more comprehensive. We first remove the exhaust flexible pipe muffler, block the drainage hole at the ground location, and then give the anti-rust oil, then shake the exhaust flexible pipe muffler, know that the anti-rust oil evenly enters the exhaust flexible pipe cylinder, and then install the exhaust Flexible pipe muffler. Then after the car has driven for about 20 kilometers, the blockage of the drainage hole can be removed. The rust prevention of automobile exhaust flexible pipe maintenance can greatly ensure that the exhaust flexible pipe does not rust after about two times a year.
Because the exhaust flexible pipe is often exposed, but it is the same as the inside of the car, so if the exhaust flexible pipe is covered with dirt, it will also affect the normal use of the exhaust flexible pipe, and other harmful substances may enter the exhaust due to improper driving of the driver. A flexible pipe, which causes other bigger problems, is also something that happens from time to time. Therefore, in the maintenance of automobile exhaust flexible pipe, we must pay attention to the cleaning of exhaust flexible pipe.
The exhaust flexible pipe and Metal Bellows of Wuxi Xishan Huanyu Metal Hose Co., Ltd. will provide a detailed maintenance plan after you buy it. Contact our after-sales department, and professional engineers will provide you with a suitable maintenance method for your product.